Press "Enter" to skip to content

How much weight can closet shelves hold?

Rely on the strength of steel. Typically, wire shelving maxes out at around 80 pounds. However, being made of steel, the tough, dependable EZ Shelf can hold up to 200 pounds (without securing to studs in 1/2” drywall) and the EZ Shelf heavy-duty garage shelving can handle even more—a whopping 250 pounds.

How much weight can a wood closet shelf hold?

For their closet shelving, you can typically expect to hold around 35 pounds per linear foot, unless you get the shelving with the ShelfTrack Hardware. Then, you can hold a very respectable 75 pounds per linear foot. If you get their Maximum Load Standard Shelving, you can expect to carry up to 600 pounds per unit.

What size are closet shelves?

In this case the shelf would need to be 24” deep. Closet shelves can house things like folded clothing, linens, shoes and purses. Clothing, linens and purses require deeper shelves that measure between 14” and 16.” Just be careful not to make shelves too deep.

How deep should closet shelves be?

24 inches

What is a good shelf depth?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

What kind of wood should I use for closet shelves?

1: Solid wood Not all wood is created equal, and that’s true for wood used for closet shelving, too. Softwoods, such as fir, might warp if used to store heavy items, while oak and cedar are more resilient. Types of wood vary by cost, as well, with hardwoods being more expensive than softwoods.

How thick should Wood be for shelves?

Thick Wood Bookshelves Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support.

What material is best for shelving?

Best Materials for Bookshelves:

  • Wood: “Solid wood” is a common term for furniture made from lumber planks.
  • Plywood: Made by stacking thin sheets — “plies” — of lumber and gluing them under pressure, plywood features grains that alternate direction for strength.
  • Particleboard:
  • MDF:
  • Metal:
  • Glass:

How thick should Plywood be for shelves?

Plywood for shelves should be 3/4 inch thick or thicker. Standard sheets of plywood come in 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, and 3/4-inch thicknesses. Plywood panels over 3/4 inch in thickness are usually special order products.

Is 1 2 plywood strong enough for cabinets?

1/2″ ply would work fine in an application like that. Curt’s suggestion is a good one, do it the right way and 1/2″ is plenty strong. It’s not an all 1/2″ or 3/4″ propostion either, you can mix the two. Why not use 1/2″ for sides and partitions and 3/4′ for the bottoms, 1/4″ for backs.

Is 12mm ply strong enough for shelves?

It is generally unsuitable for shelving as the finish is poor. Use 12mm chipboard as a minimum and support the shelf at no greater than 300mm centres for all but the lightest of loads. Or 18mm chipboard with supports no greater than 700mm apart.

Is half inch plywood strong enough for shelf?

I would say 1/2 is more for shear strength where as 3/4 is more structural. I wouldn’t use half for anything that is going to support weight. It is good for keeping something square, like the back of a wall unit of book shelf. As far as 1/2 supporting shelves or doors, I’d rather be safe than sorry.

Can I use half inch plywood for shelves?

You can use 1/2 but you will need to be sure you strengthen shelves and anything with significant weight. There are tons of ways to do this but the most common are adding a back to a box, always using glue on joints in addition to nails. Gluing 1 inch wide strips along the leading edge of a shelf, exc.

Can you use 1/2 inch plywood drawers?

Drawer box side thickness should be at least 1/2″ but if you can find 5/8″ plywood your boxes will be stronger. Unless you’re building large drawer boxes for very heavy items or large file drawers 3/4″ sides won’t be necessary.

How much weight can a shelf hold?

Shelving Load Capacities

Shelf Length Total Weight* Per Lineal Ft*
1 ft. 90 90
2 ft. 140 70
3 ft. 150 50
4 ft. 180 45

How much weight will a floating shelf support?

approximately 30 to 75 pounds

How much weight can an Elfa shelf hold?

Basics. The Elfa BuiltRite Solutions catalog gives a basic capacity of 100 lbs. per linear foot, assuming the spacing between supports measures 24 inches. The depth of the shelves runs 12, 16 or 20 inches, supported by a top track that is mounted with Elfa anchors on 1/2-inch or 5/8-inch sheet rock.

How much weight can a shelf hold in drywall?

This can be 5 to 10 pounds, but keep in mind that the drywall is an extremely brittle material and, it is not strong enough to hold the weight for a longer period of time. If you don’t have any anchors to use or other hardware to use, then you’ll want to make sure you find a stud to drill your screws into.

Can I hang a shelf on drywall?

Drywall — especially the commonly used 1/2-inch-thick size — supports heavy weights when the shelving is properly installed. You can install heavy shelves with confidence that they will remain stable and secure, by using brackets.

How much weight can a nail hold in plaster?

20 lbs.

How much weight can a 2 inch screw hold?

160-200 pounds

Are Elfa closets worth it?

The Elfa system has upgrades you can make to give it more style, but in general, it’s a pretty bare-bones system and doesn’t look like something a closet company would install. It’s worth the money if you want customizable options for your space, but you don’t want to spend on a custom job.

What is the best closet system?

The Best Closet Systems to Make Getting Dressed a Joy

  • Rubbermaid. Rubbermaid. SHOP NOW.
  • ClosetMaid. Closetmaid. SHOP NOW.
  • Neatfreak. Neatfreak. LEARN MORE.
  • IKEA ALGOT. Ikea. SHOP NOW.
  • Wayfair Basics Closet System. Wayfair. SHOP NOW.
  • IKEA PAX. Ikea. SHOP NOW.
  • The Container Store’s Elfa. Container Store.
  • Easy Track. Walmart.

How long does the Container Store Elfa sale last?

between six and eight weeks

Does Elfa ever go on sale?

Annual Elfa Sale The Elfa Sale begins around Christmas or in January, and runs through mid-February at least.

How much does an Elfa closet cost?

$2,242.50/ea. Professional Installation available. Call 888-CONTAIN for details.

Does the Container Store install closets?

Yes. Our professional Installation Service will be happy to install your space. They will remove up to two shelves and two closet rods per wall, plus perform any related touch-ups with flat white paint. We offer delivery service from all of our stores.

Does the Container Store install Elfa?

Our professional installers will remove up to two shelves and two closet rods per wall, touch up any imperfections with flat, white paint, install all Elfa products and clean up when they’re done. * Of course, you can also install Elfa yourself. Simply follow the instructions provided with your space.

Does IKEA do custom closets?

If you’ve ever priced custom closets, you know that they cost a lot. The Pax is IKEA’s workhorse wardrobe system, and it’s seen here, on Fashiion Carpet, creating an almost-custom walk-in closet. (The option for the drawers with the glass fronts, and the pull-out trays for accessories, is particularly nice.)

What does Elfa installation include?

Our installation service is 25% of the regular price of your elfa® purchase (or a minimum of $180.00) and includes the following: Removal of up to two shelves and two closet rods per wall, plus related touch-ups with flat white paint. Installation of all purchased elfa® products.