Press "Enter" to skip to content

How much does it cost to remodel a 5×8 bathroom?

Average Cost of Bathroom Remodeling Per Square Foot

Bathroom size (square feet) Total Price
5×8 (40) $4,000 – $6,000
5×9 (45) $4,500 – $6,750
7×9 (63) $6,300 – $9,450
8×10 (80) $8,000 – $12,000

How much does it cost to remodel a 5×7 bathroom?

A typical 5×7 bathroom remodel costs $4,200 to $9,600. Small bathroom renovations cost $2,000 to $5,000 and one-day bath or shower remodels from Rebath or Bath Planet run $4,000 to $10,000. Get free estimates from bathroom remodelers near you or view our cost guide below. How much will your bathroom remodel cost?

How much do tile installers charge per square foot?

The labor costs for tile installation ranges from $4 to $32 per square foot. Flooring installation goes from $4 to $14 per square foot, compared to $25 to $32 per square foot for countertops and backsplashes. Although this expense is usually set by the square foot, some pros may charge by the hour.

How much does it cost to hang and finish drywall?

On average, it costs between $0.24 and $2.25 per square foot to hang sheetrock, which includes labor. Finishing costs range between $1.00 and $1.65 per square foot on average. In total, prepare to pay between $1.30 and $4.00 per square foot to have sheetrock hung and finished.

What is the average labor cost to install drywall?

Drywall Costs Drywall installation costs $1,833, with a typical range of $1,004 and $2,877. This translates into a price of $1 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.

Is it better to run drywall vertical or horizontal?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.

How big of a gap can you fill with drywall mud?

about 1/2 inch

Does drywall or flooring go first?

When you’re hanging drywall and installing new flooring, it’s usually best to hang the drywall first and then save the floor for last.

Do you install drywall all the way to the floor?

While amateurs often install drywall panels vertically, so that the long seams align along a stud, this is not the usual professional method. Instead, begin in one upper corner of the room and install panels horizontally with the top edge against the ceiling. Pros typically install the top row of panels first.

What goes first floor or walls?

Also, the lack of baseboards and other floor trim means you can paint all the way down without any masking. In new-construction homes where no flooring has been laid yet, this is the way it works: walls are put up first, then the floor covering comes later.

Does drywall sit on subfloor?

In standard home construction, the contractor installs the subfloor before installing the drywall. In fact, the subfloor is one of the first features of construction, whereas drywall installation takes place toward the end of the project.

Should plasterboard touch the floor?

Plasterboard should never touch the floor. A small gap should be left between the bottom of the plasterboard and the floor. This allows for both floor and wall expansion while also preventing the drywall from cracking or warping.

How do you fill the gap between a wall and a subfloor?

An easy way to remedy this is to fill the gap between the wall and subfloor with caulk. The caulking should be rated for moisture and mildew resistance. It also must be flexible to allow for movement when the structure shifts. An exterior-based caulking is sufficient.

Should there be a gap between subfloor and wall?

1. Improper spacing. To avoid buckling, subfloor panels should be spaced with a 1/8-inch gap at all edges and ends to provide room for naturally occurring expansion.

How do you fix a gap between baseboard and floor?

Caulk. If you’re more concerned about dirt collecting or insect infiltration than looks, consider using caulk to fill the gaps beneath your baseboards. Line the floor with blue painter’s tape first to minimize messes, then apply a paintable latex silicone caulk to the gap.

How do you seal a gap between baseboard and floor?

A paintable, waterproof latex caulk is ideal for sealing gaps on the top edge of your baseboards, but a blend of acrylic and silicone can work just as well. For the bottom edge, a clear silicone caulk offers excellent moisture protection, although it can’t be painted.

Should there be a gap between baseboard and floor?

Gaps on your floor are the last things you would wish to deal with especially if you have a heating system. Gaps between baseboards and laminate floors are just unattractive and can affect your entire house cooling and heating system.

Should you caulk between baseboard and floor?

Sealing the spaces between the baseboard and the floor or the wall enhances the cosmetic appearance of a home. Caulk seals the gaps and develops a smoother transition between surfaces, which improves the appeal of a house. Unsealed spaces appear unsightly and often indicate poor installation.

Should you caulk between baseboards and tile floor?

If the gap between the baseboard and tile floor is around ⅛”, caulking is a perfect choice. Caulking is a better alternative than grouting between baseboard and tile. That’s because grout has a higher chance of leaving cracks between them.

Does caulking baseboards keep bugs out?

Insects can use cracks in your doors and windows to sneak inside your home. That’s why even the smallest of gaps between your windows and their jambs should be sealed with caulk. Caulk is cheap, easy to apply and goes a long way towards keeping out bugs.

What kind of caulking do you use on baseboards?

latex caulks

Do you caulk baseboards to vinyl flooring?

For hardwood, vinyl plank, or sheet vinyl, you *could* if you need to fill what might look like an unsightly gap. However, if you’re filling a gap, you better be good at caulking so it doesn’t look like you’re covering up a big mistake.

How many coats of drywall mud do I need?

Apply a heavy coat of spackle over the tape, filling the depression between the drywall. Long joints will commonly require three coats. The first coat is the heaviest and uses the most spackle. The second coat, applied after the first has dried completely, levels the joint.

What do you use to fill large drywall gaps?

You should use a mud with a hardener and fiberglass tape. Bucket mud doesn’t adhere with fiberglass very well and will crack eventually. Fill the gap with mixed mud, fiberglass tape. After its dry finish with bucket mud.

How do you fill the gap between wood and drywall?

  1. Buy an acrylic silicone caulk.
  2. Fill the gap with as much caulk as you can without letting any protrude from the gap.
  3. Use your finger or a narrow tool to press the caulk deep into the gap.
  4. Allow the caulk to dry.
  5. Embed paper drywall tape in joint compound over the drywall side of the joint.

How do you fix a gap between a wall and floor?

If you’re fixing a gap between a floor and a painted wall, such as a bedroom or living room wall, use a latex caulk. Choose a color that closely resembles the paint of your wall so the gap isn’t noticeable. Look for latex caulk at department stores, home improvement stores, hardware stores, and online.